After the gap of six months, we are having another release for Snehapadma CentralStation™
What's new?
Snehapadma Time Office
You could earlier user Employee Lists for ease of manpower planning. Now you can take Employee List wise reports. This release has better support for Autoshift and Holiday.
Snehapadma CentralStation™ Configurator
We added General Configurations menu to the Snehapadma CentralStation™ Configurator. This requires System Administrator privileges. You can set following configurations:
- Time Event Types specific to door: Now a door can be configured to interprete its time event is Out or InOut apart from as automatically set by CentralStation. This helps in specific cases when you want to interprete time events from E400/ER40 as Out events for Attendance purpose, or in case when any reader to be used only for attendance where there are no night shifts (in which time events are interpreted as InOut events).
- Emergency Input Point: You can set specific controller as an Emergency Input point. This is assumed to be Normally Open condition. Any NO fire alarm input can be given as input to CentralStation. In case of V2000, ER40 or E400, it has to be given to AC Failure Input. In case of V1000, you have to give it to Auxillary Input 1. When a closure of circuit is sensed on these points, the Door Open signal is sent to all the doors. In order to have effect of this, you will need to do Initial Provisioning of the Controller (you want to set for Emergency Input) once.
- Time Synchronization: You can on request reset the time of controllers as that of Server with a click on Reset Time Button.
CentralStation Monitor
Now view the Events as they happen in Monitor as well. A separate Grid View is provided to know the status such as Door Open, Door Forced, Tamper, AC Failure, Battery Failure and reset the Alarm from central place.
CentralStation Server
- Time of controller synchronized with Server once in a day to avoid drift.
- Can view coded status of Controller in the CentralStation server
- No need to do the Reader Interface (V100, V2000) supplementary configuration as CICO or CIFO. It is handled by Application now.
How to update?
The procedure remains simple and same:
Download the current release from link http://www.snehapadma.com/SnehapadmaCentralStation.msi
Alternately, you can also download this release from http://sites.google.com/a/snehapadma.com/central-station/installation-manual/SnehapadmaCentralStation.msi
Uninstall the Snehapadma CentralStation™ from Control Panel
Install from the downloaded msi file.
That is it.
What's Next?
What if I face any issues while using this software or hardware?
For End Customers, the first contacts are their System Integrator.
For System Integrators, you should contact ADI Branch from whom you have purchased this.
If nothing works, please feel free to send us an email at support AT snehapadma.com
You can also call us on 9890044196 (Satish) or 9975570715 (Harshal) if you require any emergency support.
Snehapadma CentralStation Team
0 comments:
Post a Comment